Managing a power-on password
A power-on password is set, changed, and deleted in Computer Setup.
To set, change, or delete this password, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
f10
while the
“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select
Security
>
Power-On password
, and then press
enter
.
●
To set a power-on password, type the password in the
New password
and
Verify new
password
fields, and then press
f10
.
●
To change a power-on password, type the current password in the
Old password
field, type
the new password in the
New password
and
Verify new password
fields, and then press
f10
.
●
To delete a power-on password, type the current password in the
Old password
field, and
then press
f10
.
3.
To save your changes, use the arrow keys to select
File
>
Save changes and exit
. Then follow
the on-screen instructions.
Your changes go into effect when the computer restarts.
Entering a power-on password
At the
Power-on Password
prompt, type your password (using the same kind of keys you used to set
the password), and then press
enter
. After 3 unsuccessful attempts to enter the password, you must
turn off the computer, turn it back on, and then try again.
Requiring a power-on password at restart
In addition to requiring that a power-on password be entered each time the computer is turned on, you
can also require that a power-on password be entered each time the computer is restarted.
To enable and disable this feature in Computer Setup, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
f10
while the
“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select
Security
>
Password options
, and then press
enter
.
3.
Use the arrow keys to select
Enable
or
Disable
in the
Require password on restart
box, and
then press
f10
.
4.
To save your changes, use the arrow keys to select
File
>
Save changes and exit
. Then follow
the on-screen instructions.
64
Chapter 10 Security
Содержание 2533t - Compaq Mobile Thin Client
