HP Enterprise FlexNetwork 10500 Series, Руководство по настройке

Страница: 14 / 325

5
A string type argument value can contain any printable characters except for the following
characters:
•
Question mark (?).
•
Quotation mark (").
•
Backward slash (\).
•
Space.
A specific argument might have more requirements. For more information, see the relevant
command reference.
To enter a printable character, you can enter the character or its ASCII code in the range of 32 to 126.
Entering an interface type
You can enter an interface type in one of the following formats:
•
Full spelling of the interface type.
•
An abbreviation that uniquely identifies the interface type.
•
Acronym of the interface type.
For a command line, all interface types are case insensitive. Table 2 shows the full spellings and
acronyms of interface types.
For example, to use the interface command to enter the view of interface Ten-GigabitEthernet 1/0/1,
you can enter the command line in the following formats:
•
interface ten-gigabitethernet 1/0/1
•
interface ten-g 1/0/1
•
interface ten-gig 1/0/1
The spaces between the interface types and interfaces are not required.
Table 2 Full spellings and acronyms of interface types
Full spelling Acronym
Bridge-Aggregation BAGG
EVI-Link EVI
FortyGigE FGE
GigabitEthernet GE
HundredGigE HGE
InLoopBack InLoop
LoopBack Loop
M-GigabitEthernet MGE
MP-group MP
NULL NULL
Route-Aggregation RAGG
S-Channel S-Ch
Schannel-Aggregation SCH-AGG
Ten-GigabitEthernet XGE
Tunnel Tun