100
Hidden files and directories
Some system files and directories are hidden. For correct system operation and full functionality, do
not modify or delete hidden files or directories.
Specifying a directory name or file name
Specifying a directory name
To specify a directory, you can use the absolute path or a relative path. For example, the working
directory is
flash:/
. To specify the
test2
directory in
, you can use the following methods:
•
flash:/test/test1/test2
(absolute path)
•
flash:/test/test1/test2/
(absolute path)
•
test/test1/test2
(relative path)
•
test/test1/test2/
(relative path)
Figure 27
Sample directory hierarchy
Specifying a file name
To specify a file, use the following methods:
•
Enter the absolute path of the file and the file name in the format of
filesystem/directory1/directory2/…/directoryn/filename
, where
directoryn
is the directory in
which the file resides.
•
Enter the relative path of the file and the file name.
For example, the working directory is
flash:/
. The
samplefile.cfg
file is in the
test2
directory shown
. To specify the file, you can use the following methods:
•
flash:/test/test1/test2/samplefile.cfg
•
test/test1/test2/samplefile.cfg
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see
Security Configuration Guide
.
File system management restrictions and
guidelines
To avoid file system corruption, do not perform the following tasks during file system management:
•
Installing or removing storage media.
•
Installing or removing cards.
•
Performing an active/standby switchover in standalone mode.
•
Performing a switchover between the global active MPU and a global standby MPU in IRF
mode.
Содержание FlexNetwork 10500 Series
Страница 139: ...130 Sysname display version ...