201
Step
Command
Remarks
8.
Specify an execution
time table for the
schedule.
•
Specify the execution date and
time:
time at time date
•
Specify the execution days and
time:
time
once
at
time
[
month-date
month-day
|
week-day
week-day
&<1-7>
]
•
Specify the execution delay
time:
time once
delay time
•
Specify the periodic execution
points of time:
time
repeating at
time
[
month-date
[
month-day |
last
] |
week-day
week-day
&<1-7> ]
•
Specify the start time and
execution interval:
time repeating
[
at time
[
date
] ]
interval interval
By default, no execution time is
specified for a schedule.
Executing the
clock datetime
,
clock summer-time
, or
clock
timezone
commands does not
change the execution time table
that is already configured for a
schedule.
Schedule configuration example
Network requirements
As shown in
, two interfaces of the device are connected to users.
To save energy, configure the device to perform the following operations:
•
Enable the interfaces at 8:00 a.m. every Monday through Friday.
•
Disable the interfaces at 18:00 every Monday through Friday.
Figure 45 Network diagram
Scheduling procedure
# Enter system view.
<Sysname> system-view
# Configure a job for disabling interface GigabitEthernet 1/0/1.
[Sysname] scheduler job shutdown-GigabitEthernet1/0/1
[Sysname-job-shutdown-GigabitEthernet1/0/1] command 1 system-view
Device
GE1/0/1
GE1/0/2
PC 1
PC 2
Содержание FlexNetwork 10500 Series
Страница 139: ...130 Sysname display version ...