139
Task
Command
Deactivate patch images.
•
In standalone mode:
install deactivate patch filename
slot
slot-number
•
In IRF mode:
install
deactivate patch filename chassis chassis-number
slot
slot-number
Aborting a software activate/deactivate operation
This task is available only for service upgrade or file upgrade performed through activate or
deactivate operation. After the operation is aborted, the system runs with the software images that it
was running with before the operation.
Task
Command
Abort a software activate/deactivate
operation.
•
Method 1: Press
Ctrl+C
while a software image is being
activated or deactivated.
•
Method 2: Abort a software activate/deactivate operation in
user view.
install
abort
[
job-id
]
Committing software changes
When you activate or deactivate images for an incremental upgrade, or install or uninstall patches,
the main startup image list does not update with the changes. The software changes are lost at
reboot. For the changes to take effect after a reboot, you must commit the changes.
Perform this task in user view.
Task
Command
Remarks
Commit the software changes.
install
commit
This command commits all
software changes.
Verifying software images
Perform this task to verify the following items:
•
Integrity
—Verify that the boot, system, and feature images are integral.
•
Consistency
—Verify that the same active images are running across the entire system.
•
Software commit status
—Verify that the active images are committed as needed.
If an image is not integral, consistent, or committed, use the
install activate
,
install deactivate
, and
install commit
commands as appropriate to resolve the issue.
Perform this task in user view.
Task
Command
Verify software images.
install verify
Deleting inactive software images
This task permanently deletes inactive image files from the device.
Содержание FlexNetwork 10500 Series
Страница 139: ...130 Sysname display version ...