HP Enterprise FlexNetwork 10500 Series, Руководство по настройке

Страница: 113 / 325

104
Task Command
Create a directory. mkdir directory
Renaming a directory
Perform this task in user view.
Task Command
Rename a directory. rename source-directory dest-directory
Archiving or extracting directories
When you archive or extract directories or display archived directories, files in the directories are also
archived, extracted, or displayed.
Perform the following tasks in user view:
Task Command
Archive directories.
tar create [ gz ] archive-file dest-file [ verbose ]
source source-directory &<1-5>
Extract directories.
tar extract archive-file file [ verbose ] [ screen | to
directory ]
Display archived directories. tar list archive-file file
Deleting a directory
To delete a directory, you must delete all files and subdirectories in the directory. To delete a file, use
the
delete command. To delete a subdirectory, use the rmdir command.
Deleting a directory permanently deletes all its files in the recycle bin, if any.
Perform this task in user view.
Task Command
Delete a directory. rmdir directory
Setting the operation mode for directories
The device supports the following directory operation modes:
•
alert —The system prompts for confirmation when your operation might cause problems such
as data loss. This mode provides an opportunity to cancel a disruptive operation.
•
quiet —The system does not prompt for confirmation.
To set the operation mode for directories:
Step Command Remarks
1. Enter system view.
system-view
N/A