HP Enterprise FlexNetwork 10500 Series, Руководство по настройке

Страница: 116 / 325

107
Deleting files from the recycle bin
Each file system has a recycle bin of its own. A recycle bin is a folder named .trash in the root
directory of a file system.
To view which files or directories are in a recycle bin, use either of the following methods:
•
Access the file system and execute the dir/all .trash command.
•
Execute the cd .trash command to enter the recycle bin folder, and then execute the dir
command.
To delete files from a recycle bin, perform the following task in user view:
Task Command
Delete files from the recycle bin. reset recycle-bin [ /force ]
Calculating the file digest
File digests are used to verify file integrity.
Use the following commands in user view:
Task Command
Calculate the digest of a file by using the SHA-256
algorithm.
sha256sum file
Calculate the digest of a file by using the MD5 algorithm. md5sum file
Setting the operation mode for files
The device supports the following file operation modes:
•
alert —The system prompts for confirmation when your operation might cause problems such
as file corruption or data loss. This mode provides an opportunity to cancel a disruptive
operation.
•
quiet —The system does not prompt for confirmation.
To set the operation mode for files:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Set the operation mode for
files.
file prompt
{
alert
|
quiet
}
The default mode is alert .
This command also sets the
operation mode for directories.