manualshive.com logo in svg

Hoshizaki DCM-230FE, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki DCM-230FE Скачать руководство пользователя страница 53

53

8.   REMOVAL AND REPLACEMENT OF DISPENSING SYSTEM

[a] AGITATOR

1) Unplug the ice dispenser.

2) Remove the Front Panel.

3) Remove the Bin Front Panel.

4) Remove the Thumbscrews and pull off the Gear Motor Bracket.

    Note: Hold the Agitator not to drop it when pulling off the Gear Motor Bracket.

5) Replace the Agitator with the new one.

6) Assemble the removed parts in the reverse order of which they were removed.

7) Plug in the ice dispenser.

[b] AGITATOR GEAR MOTOR

1) Unplug the ice dispenser.

2) Remove the Front Panel.

3) Remove the Bin Front Panel.

4) Remove the Thumbscrews and pull off the Gear Motor Bracket.

    Note: Hold the Agitator not to drop it when pulling off the Gear Motor Bracket.

5) Remove the Packing, three flat head screws and Plastic Guide.

6) Remove the four flat head screws and the Gear Motor.

7) Install the new Gear Motor.

8) Assemble the removed parts in the reverse order of which they were removed.

9) Plug in the ice dispenser.

[c] DISPENSING AUGER

Same procedure as “[a] AGITATOR”

Содержание DCM-230FE























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды