manualshive.com logo in svg

Hoshizaki DCM-230FE, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki DCM-230FE Скачать руководство пользователя страница 17

17

III.  OPERATING INSTRUCTIONS

WARNING

1. This ice dispenser is designed to produce and store edible ice. To keep the

ice dispenser hygienic:
• Wash your hands before removing ice.
•  Keep the Grille in the Tray clean. Clean it by using a neutral cleaner and
   rinse thoroughly.

2. The use of any electrical equipment involves the observance of some
    fundamental rules. In particular:

• Instances of high humidity and moisture increase the risk of electrical
   short circuits and potential electrical shocks. If in doubt, disconnect the
   ice dispenser.
• Do not pull the power cord in order to disconnect the ice dispenser from
   the feed network.
• This appliance is not suitable for unsupervised use by young children,
   aged or infirm persons.

3. All parts are factory-adjusted.  Improper adjustments may result in failure.

4. If the unit is turned off, wait for at least 3 minutes before restarting the ice

dispenser to prevent damage to the Compressor.

5. Dispensing no ice for more than 5 or 6 hours could result in spouting wet

ice or making ice bridge. Turn off the Control Switch, and remove ice from
the Storage Bin within 2 hours. Soggy and sticky ice should be removed
continuously as produced.

1. START UP

1) Clean the Storage Bin

2) Open the Water Supply Line Shut-off Valve.

3) Plug in the ice dispenser.

4) Remove the Front Panel.

5) Turn on the Power Switch on the Control Box.

Содержание DCM-230FE























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды