Hoshizaki DCM-230FE, Руководство по обслуживанию

Страница: 18 / 54

18
CAUTION
Be sure that the Control Switch, located at the bottom of the Middle Front
Panel, is moved to the “ICE” position. Verify that the Manual Drain Valve at the
bottom right of the Middle Front Panel is closed.
6) Replace the Front Panel in its correct position.
7) Check that water flows into the Water Supply and the Freezer Assembly:
• Water flows into the Reservoir through the Water Valve.
• Water flows into the Freezer bottom through the Feeder Tubing.
• The Float Switch trips to shut off or close the Water Valve.
8) Check the water supply and drain connections for water leaks.
9) After the Water Valve has closed, the Gear Motor starts first, then the Compressor, and
an automatic and continuous icemaking process starts.
10) In a few minutes, cubelet ice is extruded into the Storage Bin.
11) Check for abnormal noise from the Compressor, Fan Motor or Gear Motor after 30
minutes of running.
12) Move the Dispense Mode Switch, located at the bottom of the Middle Front Panel,
to the “PORTION” or “CONTINUOUS” position.
13) Press the Push Button to dispense ice, and the dispensing mechanism will operate.
14) Press the Push Button to dispense water, and the Water Valve will open.
Fig. 5
Fig. 4