manualshive.com logo in svg

Hoshizaki DCM-230FE, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki DCM-230FE Скачать руководство пользователя страница 11

11

Functions of Relays

1) X1

- makes just when the Bin Control Circuit closes.
- breaks t3 sec. after X2 breaks following the t2 sec. delay since the Bin Control Circuit

opens.

- will not make for t4 sec. after X2 breaks, even if the Bin Control Circuit closes.

2) X2

- makes t1 sec. after the Bin Control Circuit closes.
- breaks t2 sec. after the Bin Control Circuit opens.
- will not make while the Pressure Switch is OFF, whether the Bin Control Circuit is ON

or OFF.

3) X4

- makes for t10 sec. after the t8 sec. delay since the Bin Control Circuit closes.
- makes for t9 sec. after the t6 sec. delay since X5 is made by switching ON the Ice

Switch (portion controlled) or Ice Switch (continuous).

- makes just when X5 is made by switching ON the Ice Switch (portion controlled) or

Ice Switch (continuous), after t7 min. has passed since X4 breaks.

4) X5

- makes for t5 sec. after the Ice Switch (portion controlled) is switched ON.
- is ON while the Ice Switch (continuous) is ON.

Содержание DCM-230FE























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды