Hoshizaki DCM-230FE, Руководство по обслуживанию

Страница: 23 / 54

23
11) Pour water into the Reservoir to rinse the cleaning solution, and drain the water
system. See 6) and 7).
12) Dilute approximately 0.03 lit. of a 5.25% Sodium Hypochlorite Solution with 6 lit. of
water.
13) Pour the sanitizing solution into the Reservoir. Be careful not to overfill.
14) Wait for 10 minutes before starting the icemaking process. Turn on the Power Switch.
Run the ice dispenser until it stops automatically.
15) Turn off the Power Switch and drain the water system. See 6) and 7).
16) Rinse out the sanitizing solution. See 11).
17) Replace the Water Valve, the Top Panel and the Front Panel in their correct positions.
Note: Be sure to replace the Water Valve Packing.
18) Open the Water Supply Line Shut-off Valve, turn on the Power Switch, and run the
ice dispenser for about 30 minutes.
CAUTION
Do not use ice produced from the cleaning and sanitizing solution. Be
sure none remains in the Storage Bin.
[b] STORAGE BIN - Following Cleaning Procedures for Water System
1) Remove the Front Cover of the Storage Bin.
2) Remove the thumbscrews, and move the Agitating Motor and the Dispensing Motor
toward you. Then remove the Agitator and the Dispensing Auger. See Fig. 9.
Fig. 9