manualshive.com logo in svg

Hoshizaki DCM-230FE, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki DCM-230FE Скачать руководство пользователя страница 12

12

II.  INSTALLATION INSTRUCTIONS

WARNING

The installation must be carried out by qualified personnel, in accordance with
current regulations, according to the manufacturer’s instructions.

1. UNPACKING

WARNING

Children should not be allowed in reach of the packaging elements (plastic
bags and expanded polystyrene) as they are potential sources of danger.

CAUTION

1.  Remove shipping carton, tape(s) and packing.  If packing material is left in the
      ice dispenser, it will not work properly.

2.  Ensure all components, fasteners and thumbscrews are securely in place.

1) After removing the packaging, make sure that the ice dispenser is in good condition.  If in

doubt, please do not use the equipment but apply to professionally qualified personnel.

2) Remove the Upper Front, Top and Side Panels to prevent damage when installing the ice

dispenser.  See Fig. 1.

3) Remove the package of accessories, and check the contents:

      a) Installation Kit

            Inlet Hose

1

           Outlet Hose

2

           1/2-3/4 Nipple

1

           3/4-3/4 Nipple

2

       b)  Bracket

2

       c) Fuse

3

4) Check for 10A, 1A and 0.5A spare fuses.

5) Remove the protective plastic film from the panels.  If the ice dispenser is exposed to the

sun or to heat, remove the film after the ice dispenser cools.

Содержание DCM-230FE























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды