manualshive.com logo in svg

Hoshizaki DCM-230FE, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki DCM-230FE Скачать руководство пользователя страница 20

20

1) Close the Water Supply Line Shut-off Valve.

2) Move the Change Switch, located on the bottom of the Middle Front Panel, to the
     “CONTINUOUS” position.

3) Press the Push Button to dispense ice, and remove all ice from the Storage Bin.

4) Open the Drain Valve at the bottom of the Middle Front Panel.

5) Remove the Upper Front Panel.

6) Turn off the Power Switch.

7) Replace the Upper Front Panel in its correct position, and close the Drain Valve at the

bottom of the Middle Front Panel.

IMPORTANT

Before operating the dispenser next time, check that the Drain Valve at the
bottom of the Middle Front Panel and the Water Supply Line Drain Valve are
closed, and open the Water Supply Line Shut-off Valve.

Note: When shutting off the ice dispenser at sub-freezing temperatures, run the ice dis-

penser, with the Water Supply Line Shut-off Valve closed, and blow out the water
inlet line, by using air pressure.

Fig. 7

Содержание DCM-230FE























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды