Adjusting the brake power controller
The brake power controller reduces the applied
brake pressure according to the setting of the
control valve.
This setting must be manually adapted to the
load condition.
The adjustment lever can be set either to "No
load", "Partial load" or "Full load".
For road travel the tank must be empty, the lever
must be in "No load" position accordingly.
In practice the brake power controller may re-
main in "No load" position, also in the field.
Brake valve
Release button
Brake power controller
Maintenance:
Drain the air reservoir every day during op-
eration.
Clean the line filter as required, but at least
once every year.
Lubricate the brake shaft regularly; only press
in a small quantity of grease on the drum
side!
Adjust the brake whenever required; for this
purpose turn in the adjustment screw on the
brake lever, until the brake is applied. Then
back it out, until the wheel can be turned
freely.
1.
2.
1
2
