![horsch SW 3500 S Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/horsch/sw-3500-s/sw-3500-s_operating-instructions-manual_2164120025.webp)
1
Hitching up the seed wagon
Nobody is to remain between the tractor
and the machine when hitching up.
There is a danger of being injured on function-
related sharp edges and when converting the
machine.
Hitching-up:
Lock the tractor link arms against swinging
sideways.
Hitch up to the tractor in two-point mode.
Connect the drill controls.
Establish a hydraulic connection for the oper-
ating hydraulics and fan drive depending on
the equipment.
Connect the road lighting equipment.
Connect the brake system (option).
Raise and fold in the drill; check the safety
catch.
Route cables, lines and tubes so that they will
not be damaged during operation (when corner-
ing).
Check plug connections (hydraulic, electric and
pneumatic) for cleanliness and tight fit.
Dirty connectors will contaminate flowing media.
The connectors therefore become worn and this
results in malfunctions and failures in the con-
nected assembly groups.
Connecting the hydraulic system
Connect the hydraulic system only after it has
been depressurized on machine and implement
side.
The hydraulic system is under high pressure.
Hydraulic oil escaping under pressure can
penetrate the skin and cause serious injuries. In
case of injury, consult a doctor immediately.
The "Wing" hydraulics are equipped with a pres-
sure accumulator. Pay attention to the safety
regulations for pressure accumulators.
Hydraulic couplings are identified by symbols
at the hose brackets, in order to prevent mixing
up by mistake.
The symbol thereby is always printed on the
hydraulic hose that needs to be pressurised to
bring the machine to transport position.
Lift the machine
Fold in bout markers
Fold the machine
When operating hydraulic compo-
nents, throttle the control unit before
the machine components reach the
limit stop.
Connecting the road lighting
equipment
For transportation on public roads the road light-
ing equipment must be plugged in and needs to
be in good working order.
Connect the plug of the seed wagon lighting
equipment to the tractor.
Check lighting equipment and warning decals
for function and cleanliness.