horsch Leeb 4 AX, Руководство по эксплуатации

Страница: 17 / 161

Brake system
Depending on the equipment, the machines can
be equipped with a pneumatically or hydrauli-
cally operated service brake system.
For road travel the brake system must always
be connected and fully functional.
¾
After coupling the machine and before trans-
portation you should always check the func-
tion and condition of the brake system.
¾
Check the setting on the brake pressure
regulator.
¾
Always release the parking brake before start-
ing to drive.
¾
Always secure the machine against rolling
away and apply the parking brake before
unhitching.
Adjustments and repair work on the brake sys-
tem must only be carried out in a professional
workshop or by an operator, who has been
specially trained by HORSCH for this purpose.
Overhead lines
When unfolding or folding the folding boom, the
machine may reach the height of overhead lines.
Possible voltage flashover to the machine may
cause fatal electric shock or fire.
¾
Keep a safe distance to electric high voltage
power lines when unfolding or folding the fold-
ing boom.
¾
Never unfold or fold the folding boom in the
vicinity of power poles and power lines.
¾
With the folding boom unfolded and raised,
keep a sufficient distance to electric high volt -
age power lines.
¾
Never leave or access the machine under
overhead lines to avoid possible risks of
electric shock or voltage flashover.
¾
When operating the sprayer under high volt-
age power lines disable the BoomControl and
operate the slope compensation manually.
What to do in case of voltage flashover
Voltage flashover generates high electric volt -
ages on the outside of the machine. This results
in extreme voltage differences at the ground
around the machine. Wide strides, laying on the
ground or supporting yourself with your hands
on the ground can cause life-threatening electric
currents (pace voltage).
¾
Do not leave the cabin.
¾
Do not touch any metal objects.
¾
Do not create a conductive connection to
ground.
¾
Warn persons: DO NOT come near the ma-
chine. Electric voltages at the ground can
cause severe electric shock.
¾
Wait for professional rescuers. The overhead
power line needs to be switched off.
If persons need to leave the cabin despite the
voltage flashover, e.g. in case of a potential life-
threatening risk of fire:
¾
Jump away from the machine. Ensure a safe
stand when jumping. Do not touch the outside
of the machine.
¾
Move away from the machine with short step-
ping strides.
PTO-shaft / propshaft
Persons can be caught, pulled in and seriously
injured by the rotating PTO-shaft or propshaft.
Before switching on the PTO-shaft:
¾
Always make sure that the PTO-shaft guard
is in place and fully functional.
¾
Make sure that the chosen rotary speed and
the sense of rotation of the propshaft or PTO-
shaft correspond with the permissible values
for the machine.
¾
Make sure that no persons are inside the dan-
ger zone around the PTO-shaft or propshaft.
Never switch on or couple the PTO-shaft while
the tractor motor is shut down.
¾
Shut down the PTO-shaft if the angles are too
large. The machine could become damaged.
Parts may be thrown off and injure persons.
13