horsch Leeb 4 AX, Руководство по эксплуатации

Страница: 102 / 161

Procedure
¾
The tables apply for 50 cm nozzle spacing.
¾
Nozzle sizes and colour coding acc. to
ISO 10625
With diagram and universal table
1. Determine application quantity, travel speed
and atomizing characteristic.
2.
Nozzle type diagram (a):
Determine the operating point. The operat-
ing point is the intersection of travel speed
and application quantity.
3. Draw a vertical from the operating point
down.
4. Choose the suitable nozzle type for the
required atomizing characteristic.
For this purpose follow the classification
in the left diagram (fine, medium, coarse
drops). Pay attention to the possible noz-
zle sizes.
Characteristics Universal table:
Change to the universal table for a more
accurate determination of the characteristic
values.
5. In the column with the determined applica-
tion quantity find the line with the determined
travel speed (if necessary use an approxi-
mate value).
6. In the right hand line read the nozzle output
and the suitable nozzle sizes with the as-
sociated pressure.
Example:
to 1. Application quantity: 200 l/ha
Travel speed: 8 km/h
Atomizing characteristic: coarse drops
to 2. / 3. See diagram (a)
to 4.
Nozzle type: ID/AL
possible nozzle sizes: -025 or -03
to 5. See Universal table
to 6. Nozzle output: 1.35 l/min
Nozzles: size 025 with 5.5 bar
size 030 with 3.8 bar
96