horsch 420016020001 Скачать руководство пользователя страница 27

Страница: 27 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Operational Safety

The machine must only be put into operation after receiving instructions by employees of the authorized

dealer or a

HORSCH

employee. The machine registration form must be completed and returned to

HORSCH

In addition to the operating instructions, it is important to observe the accident prevention regulations

specified by agricultural trade associations!

All protective features and safety equipment, such as detachable protective devices, must be correctly in

place and reliably functioning before the machine is put into operation.

Caution with negative tongue load!

Under certain operating conditions the machine may have a negative tongue load.

The rear axle of the tractor is unloaded. This has a negative effect on the steering and braking

characteristics.

Care must be taken when unhitching the machine.

Always fold the wings up for transport and store the machine in the unfolded position with the wings on

the ground.

Use a Signal Person

Use a signal person to direct movement of the tractor/tillage tool whenever the tractor operator’s view is

obstructed.

Designate one individual as the Signal Person. Always have signal person stand in clear view. Be sure

signal person stays a safe distance away from the machine when it is moving.

Prior to starting tractor, discuss hand signals and what each signal means to avoid misunderstandings

and confusion which could result in a serious injury or fatal accident.

Keep all bystanders away whenever the machine is moved.

Do not stand between the tractor and implement while machine is in motion.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды