horsch 420016020001 Скачать руководство пользователя страница 31

Страница: 31 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Hydraulic Function Precautions

When handling the machine, ensure that no persons are in the danger zone.

The hydraulic functions are controlled at tractor hydraulic controls from inside the cab.

Safety Measures in Case of Injury from Oil

Eyes:

Should any oil be splashed into your eyes, rinse with water for 15 minutes. If

the eye is still irritated, contact a doctor immediately.

If Oil is Ingested:

If oil is swallowed, it is important not to induce vomiting. Contact

a doctor immediately.

Skin Irritation caused by Oil:

In case of prolonged skin contact, wash off the oil with

soap and water.

Oil Spills:

Use either sand or a suitable granular absorbent to soak up any spilled oil.

Dispose of the oil contamination absorbent in the proper manner.

Oil Fires:

Never use water to extinguish an oil fire. The oil will float on water causing

the fire to spread. Burning oil-lubricant must be extinguished using a carbon dioxide

power or foam extinguisher. Always wear respiratory equipment when dealing with

fires of this type.

Waste Oil Disposal:

Oil-contaminated waste and used oil must be disposed of in

accordance with current legislation. Check with your local hazardous waste

management coordinator. Waste oils must be collected and disposed of with local

regulations. Never pour used oil into a sewage system or drains or on to the ground.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды