horsch 420016020001 Скачать руководство пользователя страница 46

Страница: 46 / 84

46 Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Connecting the Hydraulic System

Leaking out hydraulic fluid can cause serious injuries!

Danger of injuring by unwanted machine movements.

Connect the hydraulic lines only when the hydraulics have been depressurized on both the machine and

the tractor.

In the event of an injury, seek medical attention immediately!

Hydraulic lines are identified by colored hose handles to avoid mixing up by mistake.

(See also

Hitching/Unhitching the Machine

)

When operating hydraulic components, slow down the control unit before the

machine components reach the stop position.

Hydraulic connections

•

Do not connect hydraulic lines to the tractor before both hydraulic systems (machine and tractor)

are depressurized.

•

The hydraulic system is under high pressure. Check all lines, hoses, and screwed connections

regularly for leaks and any visible external damage!

•

Only use appropriate aids when checking for leaks. Repair any damage immediately! Oil sprays

can cause injuries and fire!

•

In the case of injury, contact a doctor immediately!

The control units on the tractor must be secured or locked when not in use

or when the machine is in transport position, in order to prevent accidents

caused by unintended hydraulic movements or movements caused by

persons other than the operator (children, passengers).

Pressure Accumulator

Depending on the equipment of the machine, the hydraulic system may

have a pressure accumulator installed.

Do not open or work (welding, drilling) on the pressure accumulator. Even

after being emptied, the accumulator is still preloaded by gas pressure.

Always depressurize the pressure accumulator before starting work on the

hydraulic system. The pressure gauge should not indicate any pressure.

The pressure gauge reading should drop to 0 psi. Only then may service

be carried out on the hydraulic system.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды