Horizon Hobby JR DSM 12X Скачать руководство пользователя страница 189

Страница: 189 / 192

W-3

Three Year Warranty Period

Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties

that the Products purchased (the “Product”) will be free from

defects in materials and workmanship for a period of 3 years

from the date of purchase by the Purchaser.

Limited Warranty

(a) This warranty is limited to the original Purchaser

(“Purchaser”) and is not transferable. REPAIR OR

REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS

THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty

covers only those Products purchased from an authorized

Horizon dealer. Third party transactions are not covered by this

warranty. Proof of purchase is required for warranty claims.

Further, Horizon reserves the right to change or modify this

warranty without notice and disclaims all other warranties,

express or implied.

(b) Limitations- HORIZON MAKES NO WARRANTY OR

REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE

DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE

REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

shall be that Horizon will, at its option, (i) repair or (ii) replace,

any Product determined by Horizon to be defective. In the

event of a defect, these are the Purchaser’s exclusive remedies.

Horizon reserves the right to inspect any and all equipment

involved in a warranty claim. Repair or replacement decisions

are at the sole discretion of Horizon. This warranty does not

cover cosmetic damage or damage due to acts of God, accident,

misuse, abuse, negligence, commercial use, or modification

of or to any part of the Product. This warranty does not cover

damage due to improper installation, operation, maintenance,

or attempted repair by anyone other than Horizon. Return of any

goods by Purchaser must be approved in writing by Horizon

before shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT

OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS

OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY

CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM

IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR

STRICT LIABILITY. Further, in no event shall the liability of

Horizon exceed the individual price of the Product on which

liability is asserted. As Horizon has no control over use, setup,

final assembly, modification or misuse, no liability shall be

assumed nor accepted for any resulting damage or injury. By

the act of use, setup or assembly, the user accepts all resulting

liability.

If you as the Purchaser or user are not prepared to accept the

liability associated with the use of this Product, you are advised

to return this Product immediately in new and unused condition

to the place of purchase.

Law: These Terms are governed by Illinois law (without regard

to conflict of law principals).

Safety Precautions

This is a sophisticated hobby Product and not a toy. It must

be operated with caution and common sense and requires

some basic mechanical ability. Failure to operate this Product

in a safe and responsible manner could result in injury or

damage to the Product or other property. This Product is not

intended for use by children without direct adult supervision.

The Product manual contains instructions for safety, operation

and maintenance. It is essential to read and follow all the

instructions and warnings in the manual, prior to assembly,

setup or use, in order to operate correctly and avoid damage or

injury.

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide

warranty support or repair. Once assembly, setup or use of the

Product has been started, you must contact Horizon directly.

This will enable Horizon to better answer your questions and

service you in the event that you may need any assistance.

For questions or assistance, please direct your email to

[email protected], or call 877.504.0233 toll

free to speak to a service technician.

Warranty Information

Содержание JR DSM 12X

































































































































































































Результаты поиска

Содержание JR DSM 12X

Отзывы:

Похожие инструкции для JR DSM 12X

Бренды по названию

Популярные бренды

Horizon Hobby JR DSM 12X, Инструкция и руководство по программированию

Результаты поиска

Содержание JR DSM 12X

Отзывы:

Похожие инструкции для JR DSM 12X

Бренды по названию

Популярные бренды