Horizon Hobby JR DSM 12X Скачать руководство пользователя страница 85

Страница: 85 / 192

A-59

12X Used as Master (Instructor)

1. If the 12X is being used as the Master Tx (the Tx operated

by the instructor), select the channel(s) that are to be

operated by the Slave Tx (Tx operated by the student) when

the trainer switch is depressed.

When all channel selectors are in the MAST position, NORMAL

appears on the display and all 4 channels are transferred to the

student when the trainer switch is depressed.

If only certain channels are to be transferred to the student,

highlight and select the channels that are to be transferred,

moving the indicator for these channels to the SLAV position

for these channels. When less than all channels are selected as

SLAV, PROGRAM T appears on the display indicating that the

Trainer System has been programmed to transfer only selected

channels.

The 12X is now ready to be used as the Master or instructor

Tx. Depress the Left trim lever to transfer control to the student.

Control will remain transferred until the Left trim lever is

released.

12X Used as Slave (Student)

Highlight and select MASTER and the display will switch to

SLAVE. A message will appear instructing to Connect DSC

& POWER off. Make sure the Tx power switch is in the OFF

position and the Trainer cord is connected between the 2

transmitters.

The 12X is now ready to be used as the Slave or student Tx.

78: Trainer

The 12X features a programmable Trainer System that allows

the instructor to transfer some or all of the primary flight control

functions (Throttle, Aileron, Elevator and Rudder) to the student.

It also allows for indicating if the transmitter (Tx) is to be the

Master (controlled by the instructor) or Slave (controlled by the

student). The right or left trim lever is used to transfer control to

the student when the 12X is being used as the Master/Instructor

transmitter.

All Dual and Expo rates, Gear, and flap positions are controlled

by the Master Tx. Only the Throttle, Aileron, Elevator and

Rudder channels are transferred to the Slave transmitter.

Note

: The Slave transmitter battery must be charged.

1. Connect the Trainer cord between the Master and Slave

transmitters. Turn the power on to the Master transmitter

(the Slave Tx remains powered off and can even have the

module removed).

2. If the slave radio is a 72MHz system, make sure the Slave

Tx is in the PPM/FM modulation mode. If the slave system

is a 2.4 DSM, this does not apply.

3. Highlight and select Trainer in the FUNC.LIST to obtain the

Trainer Display.

Содержание JR DSM 12X

































































































































































































Результаты поиска

Содержание JR DSM 12X

Отзывы:

Похожие инструкции для JR DSM 12X

Бренды по названию

Популярные бренды

Horizon Hobby JR DSM 12X, Инструкция и руководство по программированию

Результаты поиска

Содержание JR DSM 12X

Отзывы:

Похожие инструкции для JR DSM 12X

Бренды по названию

Популярные бренды