Honeywell RM640, Руководство пользователя

Страница: 81 / 184

OPERATION
6
81
RM640
www.honeywellprocess.com 34-VF-25-131 iss.1 GLO Feb 2019 US
A4 Application Assistant
A4 Application Assistant A4 Application Assistant
A4 Application Assistant
A4.1 Standard Setup This starts a quick set-up procedure
applicable to most applications. You
can set the length unit, installation
specifications (tank type, tank height
etc.) and current output specifications
(0% range, 100% range, error function
etc.). For more data about the
functions, refer to Table C – Full Setup,
in this section. For more data about the
procedure, refer to Standard setup on
page 99.
Minimum access level to do the Minimum access level to do the Minimum access level to do the Minimum access level to do the
procedure:
procedure: procedure:
procedure: Expert
A4.2 Empty Spectrum Fixed and moving objects in the tank
cause interference signals. Put them
through this filter to correctly measure
the tank contents. This menu item
starts a quick set-up procedure. We
recommend that the tank is empty or
only filled to the minimum level before
you do the procedure. We also
recommend that if you installed the
device on a tank that has equipment
with parts that move (e.g. agitators),
start the equipment. Set the Save Save Save Save
Spectrum? Spectrum? Spectrum? Spectrum? step to "Yes", Empty Empty Empty Empty
Spectrum Enable Spectrum Enable Spectrum Enable Spectrum Enable step to "Enable" at
the end the procedure and set the Save
Configuration? screen to "Yes" to use
the data. For more data about the
procedure, refer to
Empty spectrum
recording
on page 102. Refer also to
"How to make a filter to remove radar
signal interference" on page 111.
Minimum access level to do the Minimum access level to do the Minimum access level to do the Minimum access level to do the
procedure: procedure: procedure: procedure: Expert
Menu
No. Function Function description Selection list Default