Honeywell RM640, Руководство пользователя

Страница: 65 / 184

OPERATION
6
65
RM640
www.honeywellprocess.com 34-VF-25-131 iss.1 GLO Feb 2019 US
In this example, the device measures a distance of 10.001 m, but C7.5.1 Length is set to "mm"
and C6.4.5 Format 1st Value is set to "X.XXX" (four digits with three decimal places). This is not
sufficient to show a measurement value of 10.001 m. If the measurement value is equal to or
more than 10 m, set C6.4.5 Format 1st Value to "Automatic".
You can change the number of digits and decimal places in the measurement values shown in
Normal mode.
Volume or mass measurement
You must make a conversion table (strapping table) to show measurement data as a volume or a
mass. Go to C3.2 Input table (Full Setup > Conversion
Full Setup > Conversion Full Setup > Conversion Full Setup > Conversion) to make the strapping table. For more
data, refer to
How to configure the device to measure volume or mass
on page 109.
Functions of keypad buttons (Normal mode)
Measurement data format errors
Figure 6-2: Error symbol: the number of digits and decimal places is not sufficient for the measurement data
1
Error symbol: the number of digits and decimal places is not sufficient for the measurement data. It is possible that
the length units must be changed from "mm" to "m".
INFORMATION!
How to change the number of digits and decimal places in the measurement values shown in
How to change the number of digits and decimal places in the measurement values shown in How to change the number of digits and decimal places in the measurement values shown in
How to change the number of digits and decimal places in the measurement values shown in
Normal mode
Normal mode Normal mode
Normal mode
1st Measurement Page:
1st Measurement Page: 1st Measurement Page:
1st Measurement Page: Go to menu C6.4 1st Measur. Page
1st Measur. Page 1st Measur. Page
1st Measur. Page and then change the number of digits
and decimal places in C6.4.5 Format 1st value
Format 1st value Format 1st value
Format 1st value, C6.4.7 Format 2nd value
Format 2nd value Format 2nd value
Format 2nd value or C6.4.9 Format 3rd
Format 3rd Format 3rd
Format 3rd
value
value value
value.
2nd Measurement Page:
2nd Measurement Page: 2nd Measurement Page:
2nd Measurement Page: Go to menu C6.5 2nd Measur. Page
2nd Measur. Page 2nd Measur. Page
2nd Measur. Page and then change the number of
digits and decimal places in C6.5.5 Format 1st value
Format 1st value Format 1st value
Format 1st value, C6.5.7 Format 2nd value
Format 2nd value Format 2nd value
Format 2nd value or C6.5.9 Format
Format Format
Format
3rd value
3rd value 3rd value
3rd value.
If there is a large change in a measurement value, set the related menu item to "Automatic".
Keypad button Symbol Function
[Right]
[>>>>] Enter Program mode
[Return]
[
^ ^ ^ ^
] —
[Escape]
[>>>>]+[ ]
—
[Down]
[ ] Change screen (measurement pages 1 and 2, and the status
message page)
[Up]
[ ] Change screen (measurement pages 1 and 2 and the status
message page)