32
5.10 Command Desciptions
In the command descriptions, the definitions and conventions below apply. For an example of each command and
associated reply, see Section 3 Commands Quick Reference. The factory default values are shown in Table 5.
Inquiry:
Information requesting command.
Action:
Action directing command(s).
EEPROM Store: Command(s) to permanently store value or condition into EEPROM.
Bold
Words that appear in boldface should be typed as shown.
Italics
Words that appear in italics are place holders for information you supply.
{Either|Or}
Words that appear in braces with a vertical line between indicate a mandatory choice
between two or more items.
Typical HPB command format: *ddcc = nnn
<cr>
Where: *
is the command header character (a ~ in one case).
dd
is the decimal address of the command message (00-99).
cc
is the command code. The command code characters may be one letter, two letters,
or a letter and a number. The letters are not case sensitive; i.e. either upper case or
lower case may be used. The HPB will convert the character to upper case.
=
equal sign (required in some commands).
nnn
additional characters (required in some commands).
<cr>
carriage return (ENTER key)
must
follow every command.
Commands are not executed until the carriage return is applied; therefore, any command message may be re-entered
at any time prior to the carriage return. To do this, just type an * followed by the remainder of the command.
Table 5. Command Factory Default List
Ring
Multi-Drop
Ring
Multi-Drop
Factory
Factory
Factory
Command
Default
Command
Default
Command
Default
A=
(empty)
I=
M2
B=
(empty)
IC
0
S=
(ser. #)
BP
N (9600)
ID
90
C=
(empty)
ID
9000
TO
M1CN
D=
(empty)
M=
(psi range)
U=
1.000
DO
E0N
MO
X2M1
V=
(ver.#)
DS
00S0
OP
ANEX
W=
100
DU
PSI
P=
(date)
X=
0
F=
0
RR
0
Z=
0