Honeywell HDZ30A, Руководство пользователя

Страница: 33 / 114

Installing the Camera | 33
800-16526 - A - 07/2014
Installing a Wall Mount
The HDXWM2 wall mount weighs 3.2 lb. (1.45 kg) and can be installed directly to a load-bearing
wall, or to a corner or pole using an appropriate adapter. The mount has a maximum load rating
of 25.8 lb. (11.7 kg) and can be installed indoors or outdoors. See the documentation included
with the wall mount for more information on securing the mount to the mounting surface.
Figure 2-11 HDXWM2 Wall Mount Installation
5. For outdoor wall mount installations, apply sealant (not supplied) to any gaps between the
mount and the mounting surface, and ensure that the conduit hole plug is in place when
the conduit hole at the base of the mount arm is not in use.
6. Feed the cables through the mount kit and screw the mount kit onto the wall mount.
7. Connect the cables to the camera (see Dip Switches and Cable Connections on page 25 ).
Connect the video output port either to a coaxial cable (with BNC connection) or with
optional UTP balun accessory if unshielded twisted pair cabling is used.
Note Check that the eyelet safety cable connection is secure, and carrying all of the
load of the camera after making all cable connections.
8. Attach the camera to the mount kit and then tightly fix the security screw on the top of the
camera.
To install a wall mount:
1. Ensure that the mounting surface can
support the combined weight of the
camera and the mount (should support
at least 8.9 lb. [4.05 kg]).
2. If you are using a corner or pole
adapter, feed the cables through the
cable access hole of the adapter, and
then attach the adapter to the mounting
surface using appropriate mounting
hardware.
3. Feed the cables through the mount,
leaving approximately 1 ft (0.3 m)
extending past the end of the mount.
Optionally, you can feed the cables
through the 0.75 in. (19 mm) conduit
hole at the base of the mount arm (see
Figure 2-11 ).
Note If you are using the recommended
safety cable for additional security,
feed it through the mount and attach
one end to the camera eyelet and the
other end to the building structure
(see
Figure 2-9 ).
4. Attach the mount to the wall or, if
applicable, to the adapter using
appropriate mounting hardware.
Screw the mount kit
into the wall mount
Attach the camera
body to the mount
kit
Tightly fix the screw at the
top of the camera after
connecting the three parts
Example of Outdoor
Dome Wall Mount
Installation
19 mm (0.75 in.) cable
access hole for
surface-mounted conduit Cable access
hole for field
service
Feed cables
through the
mount kit