Honeywell HDZ30A, Руководство пользователя

Страница: 37 / 114

Understanding the OSD | 37
800-16526 - A - 07/2014
Note When first time turning the Password Function on, please enter the
Master Password to setup the new password.
Master Password: 9527 .
Navigating OSD Menus
To select the setup item, use the joystick or direction keys on the keyboard to move the OSD
cursor in the OSD menu.
To setup items, use the joystick or direction keys on the keyboard to move the OSD cursor to
the item. For items with the
→
symbol beside them, press right/left with the joystick or direction
keys to select the function. For items with the
↓
symbol beside them, press the IRIS+ key on
the control keyboard to open the sub menu for that item. For items with the
→↓
symbols
beside them, users can use the right/left joystick/direction keys to select the functions, and then
press the
IRIS+ key to open the sub menu for the selected item.
For more detailed information on PTZ operation and OSD menu navigation, refer to the user
manual of your installed keyboard/control devices.
Note In the Camera OSD menu, the IRIS+ key functions as ENTER and the IRIS– key
functions as back/ EXIT .
During the HDZ Series PTZ dome camera’s startup process, the OSD Start Page will display
information including the camera ID number, protocol/baud rate and camera initializing
message. Additionally, if some camera errors occur, the error message(s) will be shown on the
screen at start-up. If the problem(s) cannot be immediately solved, please contact your supplier
for assistance.
On-Screen Display Overview
The HDZ Series PTZ camera on-screen display (OSD) elements are described in Table 3-1
below. Figure 3-3 shows a monitor example with OSD elements numbered. Table 3-1 describes
the elements shown in Figure 3-3 .