Honeywell HDZ30A, Руководство пользователя

Страница: 27 / 114

Installing the Camera | 27
800-16526 - A - 07/2014
Camera Control Protocol Setting
Define the protocol you are going to use on the devices of your surveillance system, based on
the devices and protocols available. It is recommended to use one protocol on all devices, even
with devices provided by different manufacturers. Use the 6-bit camera control protocol switch
(see
Figure 2-5 ) to set your camera’s control protocol and its baud rate. Refer to Table 2-4 and
Figure 2-5 for the setting details for all supported protocols with their matching switch numbers
and baud rates to help choose and select a protocol for your camera. The images in Figure 2-5 ,
below, show the dip switch configurations for the supported protocols.
Figure 2-5 Camera Control Protocol Dip Switch Settings
5 ON OFF ON OFF OFF OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF OFF OFF
Table 2-3 ID Switch Settings (cont’d)
ID
No.
Switch Setting
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
ON
1 2 3 4 5 6
1 2 3 4 5 6
VCL
(baud 9600)
Maxpro Mode
(default, baud 9600)
Pelco P
(baud 2400)
Pelco P
(baud 4800)
Pelco P
(baud 9600)
Pelco D
(baud 2400)
Pelco D
(baud 4800)
Pelco D
(baud 9600)
Table 2-4 Camera Control Protocol Switch Settings
Switch No. Protocol Baud Rate Parity
Switch Setting
SW1 SW2 SW3 SW4 SW5 SW6
00 VCL 9600 None OFF OFF OFF OFF OFF OFF
01 Pelco D 2400 None ON OFF OFF OFF OFF OFF
02 Pelco P 4800 None OFF ON OFF OFF OFF OFF
03
Maxpro Mode
a
(default)
9600 Even ON ON OFF OFF OFF OFF
11 Pelco D 4800 None ON ON OFF ON OFF OFF