Honeywell HDZ30A, Руководство пользователя

Страница: 62 / 114

www.honeywell.com/security
62 | HDZ Series Analogue PTZ User Manual
Figure 4-12 Password Sub Menu
Use the following procedure to set the password:
1. Choose a number for the password with direction keys and then press the IRIS+ key
( ENTER ) to input that number in the NEW PASSWORD field.
For example: 0

IRIS+

1

IRIS+

2

IRIS+

3

IRIS+ gives you the
password 0123 .
2. In the CONFIRM PASSWORD line, enter the same password again to confirm the setting.
3. Move the cursor to SAVE and press IRIS+ to save the setting. This will log you out of the
OSD menu.
Note If needed, move the cursor to EXIT and press IRIS+ to exit the password
setting page without saving.
To delete an entered password character, move the cursor to DELETE and
press IRIS+ to delete the previously entered character.
Using the OSD Password to Login
If OSD Password function is enabled, when you enter the OSD menu, the password request
message will be displayed as shown in
Figure 4-13 . Please enter the password, select ENTER ,
and press IRIS+ to access the OSD main menu.
Figure 4-13 Enter Password Screen
Note When the Password Function on, please enter the Master Passport if the
manually entered password has been forgotten.
Master Password: 9527 .
NEW PASSWORD : _ _ _ _
CONFIRM PASSWORD : _ _ _ _
0123456789
DELETE SAVE EXIT
PLEASE ENTER PASSWORD
_ _ _ _
0123456789
DELETE ENTER EXIT