Honeywell HDZ30A, Руководство пользователя

Страница: 67 / 114

Operation and Configuration | 67
800-16526 - A - 07/2014
5. When the title is complete, move the cursor to SAVE and press IRIS+ .
6. The new title will now display when viewing the preset it was set for.
Deleting a Preset Title
To delete the title for a preset point, select the preset to delete the title of in the PRESET POINT
field, then move the cursor to CLEAR TITLE and press IRIS+ .
Exiting the Preset Menu
Exit the PRESET menu and go back to the MAIN PAGE 2 to carry on setup of the camera.
Setting Up a Preset Tour
The preset tour feature executes a programmed path of the pan, tilt, zoom and focus functions
for the camera in a certain sequence. Before setting up this function, users must have
pre-defined at least two preset positions (see
Setting Up a Preset Position on page 65 ).
Figure 4-18 Preset Tour Menu
Selecting the Preset Tour Number
There are 16 sets of preset tours built in to the HDZ Series Analogue PTZ Dome. Use the joystick
or LEFT/RIGHT direction keys to select a tour number first, before setting its preset numbers
(see
Figure 4-18 ).
Selecting a Preset Number
Up to 32 preset positions can be setup for each Preset Tour. The Preset Numbers represent the
order of the preset positions that the HDZ Series Camera will automatically run through. The
preset position programmed as preset number 1 will be the first position of the tour, followed by
number 2, 3, and so on. Use the joystick or LEFT/RIGHT direction keys to select a Preset
Number to program.
The next setup items, including PRESET POSITION , SPEED and DWELL TIME , will influence
how the camera runs through each selected preset point.
PRESET TOUR
PRESET TOUR NO 01 →
PRESET NO. 01 →
PRESET POS. END →
SPEED 01 →
DWELL TIME 000SEC →
RUN PRE TOUR ENTER ↓
DELETE ENTER ↓
EXIT YES