Honeywell HDZ30A, Руководство пользователя

Страница: 75 / 114

Operation and Configuration | 75
800-16526 - A - 07/2014
Setting Auto IR Function
With the Auto IR Function, the Internal circuit will automatically decide the occasion to remove
the IR cut filter according to the value of light condition, as calculated by the internal light
algorithm. The Auto THRESHOLD options include
LOW , MID and HI . LOW indicates a higher
sensitivity and can improve the reliability of the lens so that it is easier to switch to Day mode
and relatively difficult to change into Night mode (that is, ambient lighting must be very low to
switch to night mode).
HI indicates that it is easier to switch to Night mode and difficult to change
into Day mode (that is, ambient lighting must be very high to switch to day mode).
Setting Manual IR Function
IR MANUAL ON
Select IR MANUAL ON to remove the IR cut filter. The camera will be in B/W (Night) mode until
it is manually changed.
IR MANUAL OFF
Select IR MANUAL OFF to attach the IR cut filter. The camera will be in Color (Day) mode,
disabling the IR function, until it is manually changed.
Configuring the Alarm Setting
The HDZ Series Analogue PTZ Dome provides four alarm inputs and two alarm outputs (N.O.
or N.C) to connect alarm devices. With this function, the Dome Camera can cooperate with the
alarm system to capture event images. For wiring, please refer to the installation guide and/or
qualified service personnel. Adjustable alarm parameters are described in the following
sections.
Figure 4-24 Alarm Setting Menu
Selecting an Alarm Pin
The HDZ Series dome provides 4 alarm inputs and 2 output (N.O. or N.C.). Use the ALARM PIN
field to select the alarm input which you want to set its alarm-related parameters. Set the
selected alarm pin’s alarm-related parameters in the Alarm Setting menu. For alarm pin
definitions, refer to
Connecting Alarm Inputs/Outputs on page 29 .
ALARM SETTING
ALARM PIN 1 →
ALARM SWITCH OFF →
ALARM TYPE NC →
ALARM ACTION PRESET →
PRESET POINT 001 →
DWELL TIME 001 SEC →
ALARM PRIORITY 1 →
ALARM OUTPUT 1+2 →
EXIT YES