Honeywell HDZ30A, Руководство пользователя

Страница: 25 / 114

Installing the Camera | 25
800-16526 - A - 07/2014
Dip Switches and Cable Connections
Before connecting the cables, take a minute to familiarize yourself with the camera’s back plate
connectors, switches, and buttons, as shown in
Figure 2-2 and Table 2-2 below.
Figure 2-2 Camera Back Plate Layout
HDZ Indoor Dome Cameras
D
B
H
E
G
D
A
B
F
E
G
HDZ Outdoor Dome Cameras
C
C
H
A
F
Table 2-2 Camera Back Plate Connectors, Switches, and Buttons
A RS485 connector (see Connecting RS485 on page 28 for more information)
B Alarm Input/Output connector (see Connecting Alarm Inputs/Outputs on page
29 for more information)
a
a
Alarm and Power connections are made with removable connectors.
C Power connector (see Connecting Power on page 29 for more information)
a
D ID setting dip switches (see ID Setting on page 26 for more information)
E BNC video output connector (see Connecting Video on page 28 for more
information)
F Reserved
b
b
These reserved switches are for setting the camera’s communication (the RS485 communication
setting). The default RS485 setting is half-duplex. Please do not change the default setting without a
qualified specialist or supplier’s notice.
G Eyelet to secure camera to building with lanyard during camera setup
H Camera control protocol dip switches (see Camera Control Protocol Setting on
page 27 for more information)