Honeywell HDZ30A, Руководство пользователя

Страница: 29 / 114

Installing the Camera | 29
800-16526 - A - 07/2014
Connecting Power
WARNING
To comply with EN50130-4 requirements, a UPS
should be employed when powering the camera.
Refer to Figure 2-7 and Table 2-6 for the power connector definition before wiring power to the
camera.
CAUTION
Check the pin definition of the power connector listed
here before connecting to the power source. The 24 V AC power source
should be connected to the first and third pin. The unit could be damaged
with an incorrect connection.
Figure 2-7 Main Power Adapter Input (Detail)
Connecting Alarm Inputs/Outputs
Refer to Figure 2-8 and Table 2-7 when making alarm connections to your camera through the
main alarm adapter.
Figure 2-8 Main Alarm Adapter Input (Detail)
1 2 3
Table 2-6 Power Input Pin Definitions
Pin Definition
1 24 V AC - 1
2 GND
3 24 V AC - 2
Inputs (x4) 5V, 4700 Ohms, pull up
Outputs (x2) Relay output, 120 V AC/30 V DC
I/O 1 2 3 4 5 6 7 8 9 10 11 12