Honeywell HDZ30A, Руководство пользователя

Страница: 60 / 114

www.honeywell.com/security
60 | HDZ Series Analogue PTZ User Manual
M.E. (Mechanical Flip)
M.E. is a standard mechanical PTZ operation. As the HDZ Series Camera tilts to the maximum
angle, it will pan 180°, and then continue tilting to keep tracking objects.
Note Flip setting is manual-controlled only. If a Preset or a point for other function (ex.
Preset Tour) is set in the position that can only be reached through FLIP motion,
when Flip is off, the position cannot be reached anymore.
OFF (No Image Flip)
Select this item to disable the flip function.
Note To make the HDZ Series Analogue PTZ Dome tilt between a specific range, such
as -10° to +100° or -10° to +190°, please go to the ANGLE ADJUSTER function
(see
Setting the Angle Adjuster on page 60 ) to set the angle range of tilt. The
ANGLE ADJUSTER options will change depending on which Flip mode is
selected. Otherwise, the dome will tilt up to 90° as the default setting.
Setting the Angle Adjuster
The item is for adjusting the angle range of the tilt motion (see Figure 4-10 ). The Range of the
tilt motion varies in different FLIP modes. The angle ranges from -10° to +100° in the M.E. FLIP
and FLIP OFF modes, and from -10° to +190° in the IMAGE FLIP mode.
Figure 4-10 Angle Adjuster Options
Setting the PT Position
PT Position can display the Pan/Tilt position of the Analogue PTZ Dome on the screen. See
On-Screen Display Overview on page 37 for the on-screen location the PT position is displayed.
ANGLE ADJUSTER
MIN ANGLE -10 DEG →
MAX ANGLE 190 DEG →
EXIT+SET YES