Honeywell AlarmNet IGSMHS, Инструкция по установке и настройке, Страница: 35 / 64

Section 3: Programming the IGSMHS
3-17
PROMPTS
ZONE
TRIG.
4204/
2-4204
ENTRY OPTIONS DESCRIPTION
36
Restore Zn2 Y/N
(Y)_
 
[Y], [N]
Enables restore reporting for zone 2.
UL: Must be set to “Y.”
37
Delay Zn2 (secs)
(00)_
 
[01-15]
[00] = no
delay Defines the reporting delay in seconds for
zone 2.
UL: Must be set to 00.
38 Rpt Zn2 ONLY if
Armed (N)_
 
[Y], [N] Reports alarms on zone 2 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 4 in 4204 mode; zone 8 in 2-4204 mode) is
triggered (armed).
If [N], always reports alarms on zone 2.
If Lynx Panic is enabled, then skip to Prompt 43: "Rpt Zn3 ONLY if Armed."
39
Zn3 Trigger Type
(V+)_

 (EOLR)
 (V+)
 (V–)
Selects the triggering method for this zone
input. Press the [space] key to scroll through
choices.
UL: V+ must be set as inverted and V– as
non-inverted.
40
Invert Zn3 Y/N
(N)_

[Y], [N] Inverts the alarm and normal states of the zone
3 trigger; otherwise uses normal input signal.
41
Restore Zn3 Y/N
(Y)_
 
[Y], [N] Enables restore reporting for zone 3.
UL: Must be set to “Y.”
42
Delay Zn3 (secs)
(00)
 
[01-15]
[00] = no
delay
Defines the reporting delay in seconds for
zone 3.
UL: Must be set to 00.
43 Rpt Zn3 ONLY if
Armed (N)_
 
[Y], [N]
Reports alarms on zone 3 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 4 in 4204 mode; zone 8 in 2-4204 mode) is
triggered (armed).
If [N], always reports alarms on zone 3.
4204 mode: If any zone is programmed to
"Report Only if Armed," skip to Prompt 54:
"Enable Zn6."
44 Zn4 Trigger Type
(V+)_


(EOLR)
 (V+)

(V–)
Selects the triggering method for this zone
input. Press the [space] key to scroll through
choices.
UL: V+ must be set as inverted and V– as
non-inverted.
45
Invert Zn4 Y/N
(N)_

[Y], [N]
Inverts the alarm and normal states of the zone
4 trigger; otherwise uses normal input signal.
46
Restore Zn4 Y/N
(Y)_
 
[Y], [N] Enables restore reporting for zone 4.
UL: Must be set to “Y.”
47 Delay Zn4 (secs)
(00)
 
[01-15]
[00] = no
delay Defines the reporting delay in seconds for
zone 4.
UL: Must be set to 00.
48
Rpt Zn4 ONLY if
Armed (N)_
 2-
4204
only
[Y], [N]
Reports alarms on zone 4 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 8 in 2-4204 mode) is triggered (armed).
If [N], always reports alarms on zone 4.