Honda 2010 CBF 250, Руководство по ремонту

Страница: 162 / 291

TRANSMISSION
CBX250
Install the rings of pressure, the spring of return and the
spring of replenishment in spindle gearbox, according to the
illustration.
ASSEMBLY OF THE CASING OF THE ENGINE
Clean completely the contact surfaces of the halves
right and left to the casing of the engine, taking care
not to damaging them.
Inspect the contact surfaces with regard to damage.
Install the ears of guide and a gasket new on the left half
of the casing of the engine.
Be sure to have installed correctly all parts of the halves right
and left to the casing of the engine.
i
Install half right on the left half of the casing of the
engine.
Do not force the halves of the casing of the engine. If
you need excessive force to install is because there is a
flaw in the assembly. Remove the right half of the housing
and please check with respect to spare poorly aligned.
Lubricate the checkpoint of oil spindle of gears with engine
oil.
Install the spindle gearbox aligning the ends of the spring of
return with the bolt spike, while holding off the plate selector
gears.
RING OF PRESSURE
RETURN SPRING
GASKET
GUIDE SPIKE
RIGHT HALF OF THE CASING OF THE ENGINE
OIL SEAL RETURN SPRING
BOLT Spike
PLATE SE-
LECTOR
GEARS
A
C
E
IT
E
NUEVA