Honda 2010 CBF 250, Руководство по ремонту

Страница: 257 / 291

SYSTEM OF ELECTRIC
STARTER
DIAGRAM OF THE SYSTEM 18-0
SERVICE INFORMATION 18-1
INVESTIGATION OF FAULTS 18-2
STARTER MOTOR 18-4
MAGNETIC SWITCH OF THE STARTER 18-10
CLUTCH DIODE 18-11
CBX250
18.
SERVICE INFORMATION
GENERAL INSTRUCTIONS
i
The •starter motor can be removed with the motorcycle engine installed in the chassis.
•To inspect the start system, always follow the procedures described in the table of Investigation of Breakdowns (page
18-2).
•A battery with low voltage can be unable to operate the starter motor with fast enough, or to provide the quantity of
needed power to the ignition system. •If the flow of the current is maintained through the starter motor, while the
motorcycle engine is stopped, the starter motor may suffer damage.
•Refer to Section 10 to obtain information in respect of services in the clutch boot.
•Refer to Section 19 to obtain information in respect of the following components: power switch Switch to start Switch
to a standstill Switch of side bracket Switch clutch
SPECIFICATIONS
Unit: mm
Before services in the starter motor, turn the power switch. Otherwise, the engine can operate suddenly,
causing serious injuries.
Item Value Service Limit
Over the motor brushes of start 12,5 8,5