Honda 2010 CBF 250, Руководство по ремонту

Страница: 156 / 291

TRANSMISSION
CBX250
INSPECTION
Gears
Inspect the projections and rebated coupling of the gears
with regard to excessive wear or damage.
Inspect the teeth of the gears with regard to excessive
wear or damage.
Measure the D. I. of each gear.
Bushes
Inspect the bushes with regard to wear or damage.
Measure the D. E. of each bush.
Measure the D. I. of each bush.
Main Axle/Countershaft
Inspect the striated and the surfaces of slippage of the
main axle and the countershaft with regard to abnor-
mal wear or damage. Measure the D. E. shaft and
countershaft in areas of the areas of slip of the hubs
and gears.
Calcule la holgura entre cada engranaje y su respectivo buje;
cada buje y el eje; y cada engranaje y el eje.
Drum of gearbox/Stump drum
Inspect the tip of the drum of gearbox with regard to scratches,
wear or evidence of insufficient lubrication. Inspect the slots in
guide of the drum of gearbox with regard to abnormal wear or
damage. Measure the D. E. from the right edge of the drum.
Service Limit 19,90 mm
Service Limit
Buje C1 18,08 mm
Buje C2 22,08 mm
Service Limit
Buje C1 22,90 mm
Buje C2 24,90 mm
DRUM OF gears
M5 20,08 mm
M6 23,07 mm
Service Limit
C1 23,07 mm
C2 25,09 mm
C3 25,07 mm
C4 22,07 mm
Service Main Axle (the bush M5)
19,91 mm
Limit Countershaft (the bush C1) 17,91 mm
Countershaft (the bush C2 and C4) 21,91 mm
Service
Slack between gear and the bush 0,10 mm
Limit
Slack between the hub and the axle C1/C2 0,10 mm