Honda 2010 CBF 250, Руководство по ремонту

Страница: 133 / 291

CLUTCH/GEAR SELECTOR
9-6
INSPECTION
Clutch Bearing
Inspect the bearing of clutch with regard to damage. Turn the
internal track bearing the finger. The bearing must turn si-
lently and soft, without noises or excessive play. Make sure
that the track outside this play excessive in the plate of
actuating the clutch. In case of the internal track not turn so
smooth and noise, or the track outside this play excessive
in the plate for the operating, replace the bearing.
Clutch Spring
Measure the free length of the spring of the
clutch.
NOTE
Replace the springs of clutch as a whole.
Service Limit 44,7 mm
CLUTCH OPERATING PLATE CLUTCH
BEARING
Disks bearings
Check the disks of friction with regard to chafing or
discolourment
Measure the thickness of the disks of friction.
NOTE
Replace the disks of friction and the plates of
clutch as a whole.
Límite de
Disco A 2,69 mm
Servicio
Disco B 2,69 mm
DISK BEARINGS CLUTCH
CBX250
DISK “A” DISK “B”
NUEVO
A
C
E
IT
E