RDMOTO CF123, Инструкция по монтажу

Страница: 1 / 2

RDMOTO CZECH REPUBLIC
info@rdmoto.cz
www.rdmoto.cz
1
CF123
KTM 690 Enduro R 2019-
Kit for Left Side Kit for Right Side
ID Description Cat. No. Pcs ID Description Cat. No. Pcs
1 Lower Frame CF123 1 1 Lower Aluminium plate X124 1
2 Strut X125 1 2 Screw M10x175mm 936 1
3 Washer M10-flat 804 1 3 Washer M10-flat 804 1
4 Self-lock nut M10 810 1 4 ------------------------- ---
5 Dural. roller d=22mm 1337 1 5 Dural. roller d=22mm 1337 1
6 Screw M10x50mm 849 1 6 Screw M10x50mm 849 1
7 AL screw cover X115 1 7 AL screw cover X115 1
8 Plastic allen bolt cover X4 1 8 Plastic allen bolt cover X4 1
9 Screw M6x20mm 1022 3 9 Screw M6x20mm 1022 3
10 Washer M6 – flat 947 3 10 Washer M6 – flat 947 3
11 Washer M6 – large 987 3 11 Washer M6 – large 987 3
12 Self-lock nut M6 948 3 12 Self-lock nut M6 948 3
Mounting Instructions:
Follow mounting procedure as shown on attached photographs.
Take off the original lower plastic casing.
Then install X125 strut into the frame, but don’t tighten it yet.
Put on the lower frame in rear part into rubber housings and lean it
towards the X125 strut.
Take M10x50mm screws, equip them with Al covers and mount into
thread on the X125 strut. To cover the bolt heads, use plastic covers
for allen bolts.
Finally, you can tighten everything.