HOKUYO AUTOMATIC UAM-05LP, Руководство пользователя

Страница: 115 / 155


Document No: C-61-00003-3


Coordinates of configured points where the numeric values are shown can be edited directly by double
clicking on the cell. It is also possible to switch between XY coordinates and polar coordinates. Further,
a new point can be added by clicking on the + button on the Pt. column.
* Use backspace key to delete a single coordinate point on the display panel.

.
 
Figure 7-43 Coordinate example

To delete the parts of the configured zone, click the delete button , then drag-drop the cursor to
specify the zone to delete.

For configuring the other zones, select the respective zone and repeat the above steps.

Confirm that each zone is configured correctly.
If overlapping of shapes disturbs in creating or confirming the zone, visibility can be toggled by
clicking the button.
Figure 7-44 Switching between visible and invisible mode
←
Invisible
←
Visible
←
Visible