HOKUYO AUTOMATIC UAM-05LP, Руководство пользователя

Страница: 97 / 155


Document No: C-61-00003-3


Tab Item Description

Function
Sensing
Check to enable the sensing function

Min detection width
*
1 (mm) 30, 40, 50, 70, 150

Active areas
*
2 : Area 1 to Area 32

Area input delay :30ms (Default), 120ms, 270ms, 1s, 2s

Operation mode : Protection 1 + Warning 1/2, Protection 1, 2

Laser off mode: Disable (Default), Enable

7-Segment display upside down configuration: Disable (Default),
Enable
EDM
Check to enable the EDM function

On delay(ms): 90 (Default), 120, 300

Off delay(ms): 300 (Default), 330, 360

* In dual protection mode, EDM1 and EDM2 can be configured
independently.
Interlock
Check to enable the Interlock function

Start/Restart mode: Manual/Automatic, Manual/Manual

Delay(s): 1(Default) to 6

* In dual protection mode, interlock can be independently configured
for protection zone 1 and protection zone 2.

Reference monitor
Check to enable the Reference monitor function

Tolerance(mm): 100 (Default) to 10000

Response time : 1s or Operating area response time

Muting
Check to enable the Muting function

Muting input sequence:
Protection zone 1:
Muting 1

Muting 2 (Default),
Muting 2

Muting 1
Protection zone 2:
Muting 3

Muting 4 (Default),
Muting 4

Muting 3

Time interval between inputs(s): 1(Default), 3, 5, 10

Max. muting period(min): 1(Default), 6, 12 and Unlimited

Max. override period(min): 1(Default), 6,12

* In dual protection mode, muting can be independently configured for
protection zone 1 and protection zone 2.

Area sequence*
3
Check to enable the Area sequence function

The check box of the area sequence possible area will be valid

The check box for all area will be valid
Master Slave
Check to enable Master Slave function
Current device*
4 : Master, (Default) Slave1, Slave2, Slave3

Slave count: 1 (Default) to 3 (For Master only)

Use own OSSD outputs (For slave only)

Encoder Input
Check to enable the Encoder Input function

Error tolerance: 0 to 80 %

Encoder pulse 1: 50 to 1000 (count/cm)

Encoder pulse 2: 50 to 1000 (count/cm)

Select patterns: Each pattern can be selected from Not Use, Use as
Static input and Use as Encoder input.