Hog Technologies Stripe Hog SK2000, Руководство по эксплуатации

Страница: 99 / 166

99
Scheduled Maintenance
5.3 Auxiliary Engine
& Reduction Gear
Proper auxiliary engine maintenance is essential to
the proper performance and reliability of the water
blasting system. You should perform all recom-
mended maintenance according to the manufac-
turer’s recommendations. Maintenance schedules
and procedures are outlined in the engine owner’s
manual. They should be followed exactly.
The UHP pump is driven by the auxiliary engine
through a direct drive reduction gear and coupler.
The reduction gear unit is lubricated by 80w90
gear oil. Oil is added through a removable plug
in the housing and oil level is monitored by a sight
glass on the side.
Daily inspection and Maintenance
• Check the crankcase reduction gear oil level.
• Check the coolant level.
• Inspect the alternator/water pump belt. Make
sure it is in good condition and adjusted prop -
erly.
300 Hour Maintenance
Perform all daily and 100 hour maintenance along
with the items outlined in this section.
• Change the oil and filter.
• Change the air filter.
•
Inspect the engine for loose bolts and nuts.
• Inspect all cooling hoses for deterioration and
damage.
Refer to the engine owner’s manual and service
manual for additional required maintenance and
service information.
500 Hour Maintenance
Perform all daily and 100 hour maintenance along
with the items outlined in this section.
• Change the reduction gear oil
Refer to the reduction gear operation manual for
additional maintenance information and instruc-
tions for changing the gear oil.
Typical Skid Auxiliary Engine
UHP Pump Reduction Gear & Sight Glass