Hog Technologies Stripe Hog SK2000, Руководство по эксплуатации

Страница: 49 / 166

49 49
Stripe Hog Systems
Refer to the Operation section of this manual for
instructions on raising, lowering and operating the
separator system.
The vacuum separator houses the vacuum filter
which protects the blower from debris. The filter
should be checked at the beginning of each shift
and periodically during operation. It is accessed by
releasing the clamps on the hinged separator lid
and swinging the lid open. The filter is mounted to
the lid and will swing out with the lid as it opens.
NOTICE:
THE SEPARATOR MUST BE LOWERED WITH THE vACUUM
SYSTEM SHUTDOWN TO SERvICE THE FILTER. THE
SEPARATOR WILL NOT OPEN TO PROvIDE ACCESS TO THE
FILTER IF THE vACUUM SYSTEM IS OPERATING. ALWAYS
MAKE SURE THE SYSTEM IS COMPLETELY SHUTDOWN BY
REDUCING ENGINE SPEED TO IDLE AND TURNING OFF THE
vACUUM AND SEPARATOR SWITCHES BEFORE OPENING
THE SEPARATOR.
The vacuum filter is a pleated, reusable filter
that is easily accessed by opening the lid on the
separator. Once the filter has been removed you
should de-grease with detergent and power wash
at 2000 psi (138 BAR). A mild solvent solution may
be used to clean thermoplastic or tar residue from
the filter surface. Always check to ensure there
are no damaged areas or holes that could allow
debris to get into the vacuum blower or silencer.
Replace the filter if it is damaged or shows any
sign of deterioration.
Refer to the Routine Maintenance section of the
manual for additional information on servicing and
cleaning the filter separator.
Separator Lid & Clamps
TANK/SEPARATOR Toggle & Remote Control Switches