CTC-CEN Service Manual 07-13 Rev.E
90
1.
Check the air pressure inlet: 7.2
2.
Check the opening arm cylinder: 7.3
3.
Check the opening arm cylinder valve: 7.4
4.
Check the opening arm end stroke screws: 8.1
5.
Check the opening arm bushing linkage: 8.1.1
6.
Call Snap On Hot line Center.
COMPLAINT 8:
When the operating arm opens it moves downward and when it closes it catches against the end
stroke screws..
1.
Check the opening arm end stroke screws: 8.1
2.
Check the play of the arm: 8.1
3.
Check the opening arm bushings: 8.1
4.
Call snap On Hot Line Center
COMPLAINT 9:
The tool damages the rims.
1.
Check if the wheel is firmly blocked to the centerpost.
2.
Check the plastic protection.
3.
Check if the vertical clearance is correct:8.2
4.
Check the horizontal clearance: 8.2
5.
Check the tool adjustment: 8.2
6.
Call Snap On Hot Line Center
COMPLAINT 10:
The bead breakers do not detach the tire bead.
1.
Check the air pressure inlet: 7.1
2.
Check the bead breaker cylinder: 7.11
3.
Check the bead breaker cylinder and discs valves:7.12
4.
Check the bead breaker discs clearance:8.7
5.
Check the bead breaker disc inclination 8.6
6.
Check the bead breaker carriage:8.8
7.
Call Snap On Hot Line Center.
COMPLAINT 11:
The air control does not inflate the tire.
1.
Check the air control: 7.21
COMPLAINT 12:
All pneumatic cylinders are too slow.
1.
Check airline pressure inlet: 7.2
2.
Check the air pressure outlet: 7.2
3.
Check the air filter –lubricator assembly:7.2
4.
Call Snap On Hot Line Center
COMPLAINT 13:
The MH arm does not have force.
1.
Check airline pressure inlet: 7.2
2.
Check the air pressure outlet: 7.2
3.
Check the air filter –lubricator assembly:7.2
4.
Check the MH cylinder: 7.17
5.
Check the MH valve: 7.18
6.
Call Snap On Hot Line Center
COMPLAINT 14:
The automatic tool does not lift the tire bead.
1.
Check airline pressure inlet: 7.2
2.
Check the air pressure outlet: 7.2
3.
Check the air filter –lubricator assembly:7.2
4.
Check the automatic tool cylinder:7.9
5.
Check the automatic tool cylinder valve: 7.10
6.
Call Snap On Hot Line Center
COMPLAINTS 15:
The bead breaker arms are locked but the beeper beeps.
1.
Check the bead breaker potentiometers:6.3
2.
Check the lower bead breaker arm actuator:5.5
3.
Check the CPU board: 5.5
4.
Check the bead breaker discs clearance:8.7
5.
Call Snap On Hot Line Center
Содержание ATC 900
