CTC-CEN Service Manual 07-13 Rev.E
5
CHAPTER 1
INTRODUCTION
1.1 GENERAL
This Service Manual describes maintenance, check and repair operations of the Dual bead breaker and Automatic
tool tire changer platform under Hofmann, John Bean and Boxer brands and is for use of qualified and trained
personnel only.
Keep this manual constantly updated, by adding Service Bulletins related to the tire changers.
IMPORTANT!
The identification data of each machine are printed on a adhesive label attached to the cabinet of the machines.
The serial number is a sequence of figures standing for the manufacturing month and year the first four numbers,
followed by the machine part number made of 7 numbers and finally the progressive serial number of the machine
manufactured with this specific part number.
In the sections dedicated to the check, replacement and adjustment of the components there will be reported some
symbols as follows:
:
Total amount of working time required to check, replace and adjust the components
: this time is
calculated considering the standard installation condition provided by the operator manual.
:
List of tools required to perform the work
.
:
Information related to the possible failure/malfunction caused by the component
CHAPTER 2
TOOLS AND SAFETY
2.1 TOOLS AND SPECIAL TOOLS
To repair and/or check these tire changer, the following standard tools are required:
Keys
:
6mm to 30mm
Tube type keys
:
7mm to 17mm
Allen keys
:
2.5 mm to 12 mm
Socket keys
:
17mm to 24mm
Allen socket keys
:
8mm to 12mm
Screw drivers
:
Flat bed and Phillips from 1 to 5
Multimeter
:
AC, DC, A, Ohm, pF
Lotctite and mechanical extractor
Special tools that are required for specific tasks are:
Ring nut socket keys:
There are 4 different keys: 10mm, 17mm, 20mm and 25mm.
Use these keys to tight or loose the knees ring nuts.
Содержание ATC 900
