HV350 Mini Frequency Inverter User Manual
27
50.00
P0
-P0-
P3
-P3-
P3.00
0.4~999.9KW
018.5
018.5
008.5
008.5
007.5
P3.01
50.00
0.4~999.9KW
0.4~999.9KW
0.4~999.9 KW
0.4~999.9 KW
PRG
SET
SET
PRG
SET
stopping state
/ running state
Basic
parameters
Stop monitoring
parameters
motor
parameters
Motor rated power
By three
times
By two
times
Motor rated
voltage
At a time
Stop monitoring
parameters
stopping state
/ running state
Fig 4-2 Procedure of parameter setup
4.6 Parameter Display
In stopping state or running state, various state parameters can be displayed by
LED. The displayed parameters can be decided by PH.00 ~ PH.01 and can be scrolled
through by pressing the
SHIFT
key. The following is an explanation for the parameters
operation method in stopping and running state.
4.6.1
Switch of Parameter Display in Stopping State
In stopping state, the drive has 9 state parameters which can be scrolled by
SHIFT
key, they are: frequency setting, external counting value, digital value input terminal
state, digital value output terminal state, panel potentiometer, analog input AI1, analog
input AI2 and DC bus voltage. Please refer to the explanation of PH.01.
The default value of PH.01 is "preset frequency". If PH.01 value is set to 2, default
display parameter in stopping state will be changed into "DC bus voltage".
User can look up other parameters during stopping state by pressing
SHIFT
key:
Everytime you press
SHIFT
key, the next parameter in stopping state will be displayed.
