Installation
6 (46)
3
Installation
This product contains parts that can be damaged by electrostatic discharge (ESD).
Use ESD prevention measures to avoid damage.
3.1
Installation Overview
1.
Mount the unit on a DIN rail.
2.
Connect the M-Bus and Ethernet cables.
3.
Connect the power supply and power on the unit.
4.
Check the network settings and configure them as required.
5.
Open the web interface to configure the unit.
3.2
DIN Rail Mount
Fig. 2
DIN rail mounting/removing
Mounting
Hook the unit onto the rail and press it towards the rail until it snaps into place.
Removing
Pull the tab at the bottom of the unit gently downwards to release the unit.
M-Bus to Modbus-TCP Gateway User Manual
SCM-1202-0096-EN 2.1
