Configuration
11 (46)
4.3
Meter Tab
This tab lists the connected meters and allows you to add and edit individual entries.
Fig. 6
Meter tab
The meter list is initially empty. After connecting meters to the gateway, click
Scan
to start
populating the list. The scanning settings can be changed on the
Configuration
tab.
Successive scans will add discovered meters to the list. Existing meters will not be deleted
even if they are unavailable. To delete a meter from the list, select it and click
Delete
.
Scanning can take a long time depending on the scan mode and the number of connected
meters. The scan process cannot be interrupted.
Discard the changes made on the page and reload the currently active settings.
Refresh all the read out meter values. The normal update cycle will not be not affected.
Scan for meters on the M-Bus.
Add meters not found during a scan or that do not support an automated scan.
Delete the selected meter entry. Individual value entries cannot be deleted.
Save the changes and reinitialize the gateway.
See
Print Page, p. 21
.
M-Bus to Modbus-TCP Gateway User Manual
SCM-1202-0096-EN 2.1
